2nd Shift Robotic Polisher

JOB FUCTION AND SCOPE

The robotic polishing cell operator receives castings from the Machine Shop and processes them through the polishing robot before moving these parts to Inspection.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Load and unloads multiple belting and buffing robots.
• Operate all the mechanical and control functions of the cells including:
• Installing, monitoring and replacing of abrasive belts
• Installing, monitoring and replacing buff wheels
• Initiating and downloading polishing & buffing programs, including physical changeover and setup of work cell.
• Basic troubleshooting and diagnosis of the programs and mechanical systems to support proper operation of work cell.
• Maintain liquid and solid buffing compounds
• Inspect each casting after belting and buffing; use a manual wheel to make corrections so that the parts are of acceptable quality to plate.
• Fanuc Robotic tool handing.
• Other duties may be assigned.

QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION And/or EXPERIENCE Recommended:

• A high school diploma or equivalent, and 3-5 years polishing shop experience as a polisher or buffer are required.
• Visual acuity is required.

TRAINING

• Employee Orientation
• Legal Compliance Calendar
• ISO Training Matrix
• PLC interface to control robotic equipment
• Wheel and belt changing
• Troubleshooting and diagnostics

LANGUAGE SKILLS

• Must be able to write and speak English and able to communicate with co-workers and supervisors.

MATHEMATICAL SKILLS Must be able to use math skills including addition and subtraction.

REASONING ABILITIES

• Some judgment is required to set up assigned machine in accordance with standard methods and procedures.
• Operator must be able to support the work cell in order to achieve and maintain prescribed production and quality rates.

CERTIFICATES, LICENSES, REGISTRATIONS

• None required

PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is to stand and use hands and fingers to handle and feel. It is necessary that this employee sees clearly including close vision and be able to adjust focus. Must have good motor skills and hand to eye coordination. The employee is frequently required to talk or hear. While performing the duties of this job, the employee is frequently required to walk, sit, talk, and/or hear. Must be able to stand, bend, reach and count at a work-station and walk in a manufacturing environment. Must be able to grasp and work with small parts. Must be able to read fine print at times. Must be able to lift 50 lbs on a frequent basis.

WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The position works in the manufacturing facility with extreme temperatures depending on weather and where the noise level is sufficient to require hearing protection as well as other safety equipment as needed.

JOB FUCTION AND SCOPE The robotic polishing cell operator receives castings from the Machine Shop and processes them through the polishing robot before moving these parts to Inspection.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Load and unloads multiple belting and buffing robots.
• Operate all the mechanical and control functions of the cells including:
• Installing, monitoring and replacing of abrasive belts
• Installing, monitoring and replacing buff wheels
• Initiating and downloading polishing & buffing programs, including physical changeover and setup of work cell.
• Basic troubleshooting and diagnosis of the programs and mechanical systems to support proper operation of work cell.
• Maintain liquid and solid buffing compounds
• Inspect each casting after belting and buffing; use a manual wheel to make corrections so that the parts are of acceptable quality to plate.
• Fanuc Robotic tool handing.
• Other duties may be assigned.

EDUCATION And/or EXPERIENCE Recommended:

• A high school diploma or equivalent, and 3-5 years polishing shop experience as a polisher or buffer are required.
• Visual acuity is required.

TRAINING

• Employee Orientation
• Legal Compliance Calendar
• ISO Training Matrix
• PLC interface to control robotic equipment
• Wheel and belt changing
• Troubleshooting and diagnostics

REASONING ABILITIES

• Some judgment is required to set up assigned machine in accordance with standard methods and procedures.
• Operator must be able to support the work cell in order to achieve and maintain prescribed production and quality rates.

CERTIFICATES, LICENSES, REGISTRATIONS

• None required

ADDITIONAL COMMENTS PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is to stand and use hands and fingers to handle and feel. It is necessary that this employee sees clearly including close vision and be able to adjust focus. Must have good motor skills and hand to eye coordination. The employee is frequently required to talk or hear. While performing the duties of this job, the employee is frequently required to walk, sit, talk, and/or hear. Must be able to stand, bend, reach and count at a work-station and walk in a manufacturing environment. Must be able to grasp and work with small parts. Must be able to read fine print at times. Must be able to lift 50 lbs on a frequent basis.

WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The position works in the manufacturing facility with extreme temperatures depending on weather and where the noise level is sufficient to require hearing protection as well as other safety equipment as needed.

APPLICATION Would you like to make a career change within Geberit? An exciting job is waiting for you! We look forward to receiving your detailed online application.

YOUR CONTACT Chicago Faucet Company

Tina Vondrashek-Hernandez