AM- Manufacturing Engineer

Job highlights

• B.E./B.Tech. in Mechanical, Production, Manufacturing or Aerospace Engineering with 8-15 years aerospace precision manufacturing experience, expertise in CNC machining, 5-axis machining, NX CAM/Mastercam, AS9100/AS9145/AS9102 standards

• Lead aerospace product development from customer drawing/3D model through DFM, process planning, APQP, CAM strategy, CNC prove-out, FAIR, process capability and production release

• Aerospace Product Development & NPI End-to-end experience in developing aerospace precision components from customer drawing/3D model through manufacturing feasibility, process development, validation and production release.

• DFM / Manufacturing Feasibility Strong knowledge of Design for Manufacturability, drawing interpretation, GD&T, tolerance stack-up, critical characteristics and manufacturability review.

• CNC Machining Expertise – Strong practical knowledge of CNC Turning, VMC 3-axis, 4+1 axis and 5-axis machining, including machining strategy, tooling, fixtures, cutting parameters, tool life and cycle-time optimization.

• Aerospace Materials & Processes – Working knowledge of Aluminium alloys, Stainless Steel, Titanium, Inconel/Nickel alloys and other aerospace materials, including heat treatment and surface/special processes.

• Process Engineering – Ability to develop complete manufacturing process plans, operation sequences, setup sheets, tooling/fixture requirements, inspection methods and standardized work instructions.

• CAM & Manufacturing Strategy – Ability to work closely with CAM programmers and review/optimize machining strategies, toolpaths, tooling, workholding and machining parameters; hands-on CAM experience is preferred.

• APQP / Aerospace Quality Planning – Strong understanding of APQP, process flow, PFMEA, Control Plan, MSA, SPC, process validation and production readiness; AS9145 exposure is preferred.

• FAIR / AS9102 – Practical experience in Aerospace First Article Inspection, ballooned drawings, characteristic identification, FAIR preparation, dimensional validation and resolution of FAIR issues.

• AS9100 & Aerospace Requirements – Good understanding of AS9100 QMS, customer specifications, configuration control, traceability, engineering changes and aerospace compliance requirements.

• Process Capability & Statistical Analysis – Experience with Cp, Cpk, Pp, Ppk, SPC, MSA and capability studies, particularly for critical aerospace characteristics.

• Process Validation & Prove-Out – Hands-on experience in CNC prove-out, first-off development, process validation, capability improvement and successful transfer of new products to production.

• Problem Solving & Quality Improvement – Strong knowledge of 8D, Root Cause Analysis, 5-Why, Fishbone, corrective action, NCR/MRB and process-related problem solving.

• Lean & Continuous Improvement – Experience in cycle-time reduction, setup-time reduction, SMED, tool-cost reduction, scrap/rework reduction, productivity improvement, OEE and Kaizen.

• Engineering Change Management – Ability to evaluate and implement drawing revisions, process changes, tooling changes and customer engineering changes while maintaining configuration control.

• Cross-Functional Leadership – Ability to work effectively with Design Engineering, CAM, Production, Quality, PPC, Tooling, Supply Chain and Customer/Program Management teams.

• Hands-on Manufacturing Mindset – Must be capable of working directly on the shop floor, understanding machining problems, supporting operators/programmers and converting engineering requirements into stable production processes.

• Documentation & System Discipline – Strong capability in preparing and maintaining process plans, PFMEA, Control Plans, work instructions, setup sheets, tooling documents, capability reports, APQP and FAIR documentation.

• Cost & Productivity Focus – Ability to develop processes that achieve required quality, delivery, cost and productivity targets while maintaining aerospace compliance.

• Digital / Advanced Manufacturing – Exposure to Industry 4.0, manufacturing data analysis, digital work instructions, automation, process monitoring and smart manufacturing is an advantage.

The candidate must have strong hands-on experience in Aerospace New Product Development and Manufacturing Process Development, with the ability to independently take a component through:

1. Customer Drawing / 3D Model

2. DFM & Manufacturing Feasibility

3. Process Planning

4. APQP / PFMEA / Control Plan

5. CAM / Machining Strategy

6. CNC Prove-Out

7. FAIR / AS9102

8. Process Capability

9. Production Release.

Qualification & Experience

• B.E./B.Tech. in Mechanical, Production, Manufacturing or Aerospace Engineering preferred.
• 8–15 years of relevant experience in aerospace precision component manufacturing.
• Experience in an AS9100-certified aerospace manufacturing environment is strongly preferred.
• Hands-on experience with CNC machining and new product development is essential.

Preferred Technical Skills

• 5-axis machining and complex aerospace component manufacturing.
• NX CAM, Mastercam, HyperMill or equivalent CAM software.
• AS9100, AS9145 and AS9102 requirements.
• GD&T / ASME Y14.5.
• SPC, MSA, Cp/Cpk and Pp/Ppk.
• Lean Manufacturing, Kaizen, SMED and process optimization.
• Industry 4.0, automation and digital manufacturing.