Blasting & Painting Technician

Clean and prepare metallic surfaces, piping, and fabricated structures using abrasive blasting to achieve specified cleanliness profiles (e.g., SA 2.5 / NACE 2). Mix and prepare industrial paints, primers, and chemical coatings in strict accordance with Technical Data Sheets (TDS) and Material Safety Data Sheets (MSDS). Operate airless and conventional spray equipment to apply primers, intermediate, and finish coats to specified dry film thicknesses. Perform wet and dry film thickness measurements using specialized gauges to ensure compliance with quality standards. Inspect, clean, and maintain blasting pots, air compressors, spray guns, hoses, and pressure regulators on a routine basis. Mask and shield critical components, machined faces, threads, and electrical parts from overspray and damage. Monitor and record ambient conditions, including relative humidity, dew point, and steel surface temperatures prior to application. Maintain accurate logs of material batches, environmental parameters, and layer thickness test results on daily job reports. Safely handle, store, and dispose of paints, thinners, solvents, and hazardous waste in accordance with environmental regulations.

Desired Candidate Profile

Diploma in a relevant technical field. NACE / AMPP (or equivalent) Blasting & Coating Certification. Minimum of 2 years of hands on experience in blasting and painting industrial structures. Proficient in reading and applying TDS and MSDS documentation. Ability to operate and maintain blasting pots, air compressors, and spray equipment. Experience with wet and dry film thickness measurement techniques. Knowledge of environmental condition monitoring (humidity, dew point, surface temperature). Demonstrated safe handling and disposal of hazardous chemicals and waste. Strong documentation and reporting skills. Effective teamwork and communication abilities.