Engineer- EMI EMC Testing

Job Summary

Eaton's Enterprise CoE located in Pune, India has an opening for an Engineer in Test lab team within the Eaton India Innovation Center. This role is established for EMI/EMC Laboratory in EIIC Mobility Group. The core responsibilities of this position are following:

Responsibilities

• Perform EMI/EMC compliance and pre-compliance testing on electrical and electronic products validate products as per applicable IEC /CISPR 25 and ISO 11452 Standards.

• Prepare test setup as per test plan and standard, perform the tests, monitor test results and generate a test report.

• Maintain lab equipment, manage track test requests, implement and maintain 5S activities, support safety initiative, and participate in planning of lab and equipment upgrades.

• Validate products by performing EMI/EMC tests as per applicable IEC/ CISPR 25 and ISO 11452/MIL/ RTCA-DO Standards.

• Prepare test setup and operate EMC test equipment, including Spectrum analyzers; EMI receivers; Signal generators; Antennas; LISNs; RF amplifiers; Oscilloscopes; ESD, EFT, Surge, and Conducted emissions and immunity testing according to applicable standards CISPR, IEC, ISO, FCC, MIL-STD, EN standards, etc.

• Prepare test samples, cabling configurations, and test environments, monitor test results and generate a test report.

• Maintain calibration records and ensure equipment is functioning properly.

• Assist engineers in troubleshooting EMI/EMC failures and implementing corrective actions.

• Coordinate with engineering, quality, and product development teams during validation and certification activities.

• Assist in developing test procedures and work instructions.

• Support capital equipment and road mapping process for the test lab to identify equipment upgrades, capacity increases, and new technologies to be incorporated.

• Maintain inventory, order miscellaneous materials other low value assets as per set-up/tests requirements.

• Monitor provide quality performance trends.

  Qualifications

• Masters degree with 1 to 2 years of experience, or Bachelors degree in Electrical, Electronics, Power Electronics, Mechatronics, or Instrumentation Engineering with 3 to 5 years of relevant experience in the EMI/EMC testing domain.

• 2 to 4 years of hands-on experience in EMI/EMC testing within semi-anechoic or fully anechoic chamber

  Skills

• Sound knowledge of different EMC Standards like IEC, CISPR 25 and ISO 11452, FCC, MIL, DO160, ISO, RTCA-DO;IEC 61000 etc.

• Hands on experience of performing different EMC tests e.g. Radiated emission, Radiated immunity, Conducted Emission, Conducted Immunity, ESD, Surge, BCI, EFT, VDI etc.

• Maintenance experience of different EMC equipment s like EMI Receiver, Antennas, filters, pre-amplifiers, Signal generator, field probe, RF amplifiers, Oscilloscopes, LISN, etc.

• Maintenance experience of different Semi / Full Anechoic EMC chamber components like Turn table, Antenna Mast, Chamber door etc.

• Hands on experience of different chamber manufacturer software like TDK Emissions Lab and Radiated Immunity Lab, RS EMC 32, ETS-Lindgren TILE etc.

• Ability to develop test plans, procedures and setups.

• Strong troubleshooting and root cause analysis skills.

  Desired

• Hands on Experience in EMC testing of Automotive and Electrical products.

• Knowledge on different anechoic chamber parameters like NSA, SVSWR, FU, shielding effectiveness etc. and relevant standards.

• Experience with LabVIEW, Python, MATLAB or automation tools.

• Knowledge of APQP, DFMEA and DVPR processes.

  Special Skills

• Understanding of product certification e.g. CE, CSA, UL, VDE etc.

• Sound knowledge on EMC test safety

• Design for Six Sigma / DMAIC

  Competencies

• Accountability - Takes complete responsibility of assigned tasks and delivers results despite of roadblocks

• Passion - Pursues everything with drive and motivates others around to contribute towards the cause

• Resourceful - Works across the boundaries to get the desired things done timely

• Problem Solving - Uses rigorous logic and methods to solve difficult problems with effective solutions, Looks beyond the obvious solutions and comes up with creative/ innovative proposals

• Learner - Takes efforts to upskill self and shares the learnings with broader team proactively

• Transparency - Should create open and trusting environment in the team

Disclaimer: This job posting has been aggregated from external source. Role details, content, and availability are subject to change. Applicants are advised to confirm the latest information directly on the company website before applying.