Engineer Production

Walk-In Interview venue- shimla bye pass chowk majra opposite of rajdhani chicken point 248171 from 12-oct-2026 to 17-oct-2026 (Contact :- 8218877588) for Production Engineer in a manufacturing facility producing steel tubular poles plays a pivotal role in overseeing and optimizing the production process, ensuring efficiency, product quality, and compliance with industry standards. Below is a breakdown of the scope of a Production Engineer in such a manufacturing setup, including responsibilities related to inspection:

1. Production Planning and Process Optimization:

• Process Design: Developing and optimizing manufacturing processes for the production of steel tubular poles, including material handling, welding, forming, and finishing processes.
• Production Scheduling: Ensuring that production schedules align with project timelines, delivery deadlines, and available resources (labor, equipment, and raw materials).
• Capacity Utilization: Maximizing the use of machinery, equipment, and labor to meet production targets while maintaining cost-effectiveness and minimizing waste.
• Lean Manufacturing: Implementing lean practices to reduce production lead times, eliminate waste, and improve overall efficiency.

2. Quality Assurance and Control:

• Quality Standards: Ensuring that steel tubular poles are manufactured in compliance with industry standards such as IS 2713, IS 1239, or other relevant standards.
• Quality Control (QC) Inspections: Establishing and overseeing QC checks during various stages of production, including material selection, fabrication, welding, galvanization, and final finishing.
• Testing and Certification: Supervising physical and mechanical tests (e.g., strength testing, corrosion resistance testing, dimensional checks) to ensure poles meet the required specifications.
• Defect Analysis: Identifying defects or deviations in the product and implementing corrective actions to prevent recurrence.

3. Inspection and Compliance:

• Raw Material Inspection: Verifying the quality and specifications of raw materials (steel pipes, plates, fittings) used in the production of poles. Ensuring compliance with IS standards and contractual requirements.
• In-Process Inspection: Monitoring the production process to identify potential issues at an early stage. This includes inspection of the welding process, dimensional accuracy, and alignment of the tubular poles.
• Final Product Inspection: Conducting inspections on finished poles, focusing on factors like length, diameter, straightness, thickness, galvanization quality, and any surface defects.
• Third-Party Inspection Coordination: Coordinating with third-party inspectors (like clients or certifying agencies) for external inspections and certifications before dispatch.

4. Maintenance and Equipment Management:

• Machinery Maintenance: Ensuring that all manufacturing equipment (like bending machines, welding units, and galvanization plants) are maintained in optimal condition, reducing downtime.
• Preventive Maintenance Plans: Developing schedules for routine maintenance to minimize machine breakdowns during production runs.
• Equipment Calibration: Ensuring the accuracy of equipment and tools used for inspections and measurements.

5. Health, Safety, and Environmental Compliance:

• Safety Protocols: Implementing and enforcing workplace safety protocols to protect workers from hazards related to heavy machinery, welding, and chemical processes (such as galvanization).
• Environmental Compliance: Ensuring that the factory complies with environmental regulations related to emissions, waste management, and hazardous materials (such as zinc used in galvanization).

6. Supply Chain and Material Management:

• Inventory Control: Managing the supply chain for raw materials like steel and consumables (such as welding rods, galvanization chemicals), ensuring there is no disruption in production.
• Supplier Coordination: Working closely with suppliers to ensure timely delivery of high-quality raw materials.

7. Cost Control and Efficiency Improvements:

• Cost Analysis: Monitoring production costs and identifying areas where savings can be achieved without compromising quality.
• Process Improvement Initiatives: Continuously analyzing and improving manufacturing processes to reduce costs, increase production efficiency, and enhance product quality.

8. New Product Development and Prototyping:

• Prototype Development: Involvement in the design and testing of new types of poles based on market demand or client specifications.
• Design Modifications: Working with the design and R&D teams to refine pole designs to improve structural integrity, ease of installation, or cost-effectiveness.

9. Documentation and Reporting:

• Production Reports: Maintaining detailed records of production data, including output rates, quality issues, and downtime analysis.
• Inspection Reports: Preparing reports on inspection findings, including details of any defects, corrective actions taken, and test results.

10. Client Interaction and Technical Support:

• Client Requirements: Understanding client specifications for custom pole designs or specialized coatings and ensuring that production processes meet these requirements.
• Technical Liaison: Providing technical support to clients during factory inspections, answering queries related to pole manufacturing, and clarifying any discrepancies.

Summary of Key Skills for a Production Engineer in Steel Tubular Pole Manufacturing:

• Strong knowledge of metallurgy and fabrication processes.
• Proficiency in welding technologies, galvanization, and NDT (Non-Destructive Testing) techniques.
• Experience with quality assurance, inspection protocols, and compliance standards.
• Ability to handle production planning, machinery maintenance, and cost control.
• Familiarity with industry standards like IS 2713 (for tubular poles) and IS 1239 (for steel pipes and fittings).

In conclusion, the role of a Production Engineer in a steel tubular pole manufacturing plant is multifaceted, combining technical expertise, production management, quality control, and compliance responsibilities. The engineer ensures that manufacturing processes are efficient, cost-effective, and in line with industry standards, with a critical focus on inspections to guarantee product integrity and client satisfaction.

4o

Job Type: Full-time

Pay: ₹15,000.00 - ₹25,000.00 per month

Education:

• Diploma (Preferred)

Experience:

• total work: 1 year (Preferred)

Shift availability:

• Day Shift (Preferred)

Work Location: In person