Hardware Electronics Engineer

Job highlights

• Document every board you own - schematic revision,BOM,pin map,flashing procedure,known issues - to a standard a stranger could work from. Support products through EMC pre-scan and certification,and act on what the scan finds.
• Exposure to EMC,radio or safety certification,in India or internationally.

Job Summary

Design the boards behind our connected products - schematic, layout, bring-up and debug - and be the person who gets a prototype working by Friday.

Responsibilities

• Design schematics for connected consumer products - power, sensing, wireless, interface - and own the component selection behind them
• Lay out multi-layer PCBs with proper attention to grounding, decoupling, impedance, EMI and manufacturability
• Bring up new boards and debug them to a working state, with a scope, a logic analyser and a method
• Write enough embedded code to validate your hardware, then hand over cleanly to firmware
• Build test rigs and harnesses so board validation is a repeatable sequence rather than an improvisation each time
• Work with mechanical and industrial design on board outline, connector placement, antenna keep-outs and thermal paths - early, not after the enclosure is fixed
• Manage fab and assembly vendors: BOM, gerbers, pick-and-place files, DFM feedback, first article review
• Document every board you own - schematic revision, BOM, pin map, flashing procedure, known issues - to a standard a stranger could work from
• Support products through EMC pre-scan and certification, and act on what the scan finds
• Architect for the parts you are given and own the component selection behind them
• Order your own components, solder your own rework, and chase your own fab vendor

Requirements

• Degree or diploma in electronics, electrical, instrumentation or communications engineering
• Low-power or battery-powered product experience - power budgets, sleep modes, charging
• Exposure to EMC, radio or safety certification, in India or internationally
• Experience with sensor integration, analog signal conditioning, or RF layout inside a difficult enclosure
• 3-6 years designing electronics for products that were built, not just prototyped on a dev board
• Strong schematic and PCB layout ability in a professional tool - Altium, KiCad, OrCAD or Eagle - including multi-layer boards
• Demonstrable bring-up and debug skill: you can describe the hardest bug you found and exactly how you found it
• Comfortable with embedded C at the register level, enough to prove a peripheral works
• Hands-on with the bench - soldering, rework down to fine-pitch parts, scope, logic analyser, bench supply
• You have worked with a fab or assembly house and dealt with their DFM feedback
• Something you built for yourself, outside work, that you can show us
• Based in Bengaluru or willing to relocate; this is a bench job and it is on-site

Disclaimer: This job posting has been aggregated from external source. Role details, content, and availability are subject to change. Applicants are advised to confirm the latest information directly on the company website before applying.