QAQC ENGINEER

QA/QC Roles & Responsibilities

1. Review all IFC Drawings, Specifications, Method Statements, ITP and WMS before work commencement.

2. Prepare and implement the Project Quality Plan (PQP), Inspection & Test Plan (ITP) and Inspection Checklists.

3. Verify that all materials supplied by the Main Contractor comply with the approved specifications before installation.

4. Conduct pre-installation inspection prior to commencement of each work activity.

5. Monitor and inspect the following activities:

* Surface Preparation / Hacking

* HPWJ Surface Cleaning

* Steel Surface Cleanliness (SSPC-SP WJ-2 / NACE WJ-2)

* Rebar Installation

* Plastic Spacer Installation

* Cadweld Installation

* Steel Formwork Installation

* Clamp & Stopper Installation

* UHPFRC Grouting Preparation

* UHPFRC Placement

* Formwork Removal

* Final Surface Finishing

6. Verify dimensions, alignment, spacing, cover, levels and tolerances comply with approved drawings.

7. Ensure reusable steel formwork is correctly installed, aligned, sealed and securely clamped before grouting.

8. Witness pre-grouting inspection and confirm all hold points have been cleared before issuing work release.

9. Monitor grouting operation, including:

* Leakage observation

* Formwork stability

* Concrete filling sequence

* Completion verification

10. Coordinate inspections with Dumas and Consultant.

11. Raise Request for Inspection (RFI) for completed work.

12. Record all inspection results and maintain quality documentation.

13. Prepare Daily QA/QC Inspection Report.

14. Prepare Quality Dossier including:

* Inspection Reports

* RFI

* ITP Records

* Material Certificates

* Calibration Certificates

* Daily Reports

* NCR Close-out Records

15. Raise Non-Conformance Report (NCR) whenever workmanship or materials do not comply with project requirements.

16. Monitor corrective and preventive actions (CAPA) until close-out.

17. Verify completed quantities jointly with Site Engineer and Consultant for measurement and certification.

18. Maintain photographic records before, during and after each work activity.

19. Ensure all quality records are properly filed and traceable.

20. Assist Project Manager in achieving project quality objectives and compliance with contract specifications.