Secondary Operations Floater

Position Summary Key Responsibilities Machine Operation

• Set up, operate, and tend manual assembly machines including presses, jigs, and fixtures according to work orders and production schedules.
• Operate and monitor automated assembly equipment such as programmable assembly systems, conveyor-fed lines, and turntable type machines to ensure efficient, high quality operation.
• Load and unload raw materials, components, and finished parts to and from machines.
• Perform changeovers between product runs, including tooling swaps, fixture adjustments, and program selection.

Quality & Inspection

• Inspect finished assemblies using calipers, gauges, go/no-go fixtures, and other measurement tools to verify dimensional and functional conformance and record the results per work instructions.
• Identify and segregate non-conforming parts; complete reject tags and notify supervisor of recurring defects.
• Perform first-article and in-process inspections per control plans and quality documentation.
• Maintain production records including part counts, scrap logs, and inspection results.

Maintenance & Housekeeping

• Perform routine operator-level preventive maintenance tasks: lubrication, cleaning, minor adjustments, and consumable replacement.
• Report equipment malfunctions, unusual noises, or performance degradation to maintenance personnel promptly.
• Keep work area, machines, and tooling clean and organized in accordance with 5S standards.
• Properly store fixtures, tooling, and materials at end of shift.

Safety & Compliance

• Follow all company safety policies, and OSHA regulations at all times.
• Wear required personal protective equipment (PPE) including safety glasses, hearing protection, and gloves as applicable.
• Immediately report unsafe conditions, near-misses, or injuries to the supervisor.
• Participate in safety training, toolbox talks, and continuous improvement initiatives.

Teamwork & Communication

• Communicate effectively with team leads, quality technicians, and maintenance staff regarding production status and issues.
• Support cross-training efforts by learning multiple machine types and assembly processes.
• Assist with new operator onboarding and informal knowledge transfer as requested.

Qualifications Education & Experience

• High school diploma or GED required.
• Minimum 1 year of experience operating manual or automatic assembly equipment in a manufacturing environment preferred; entry-level candidates with mechanical aptitude will be considered.
• Experience reading and interpreting work orders, engineering drawings, or assembly instructions a plus.

Skills & Abilities

• Mechanical aptitude with the ability to understand machine operation and identify basic problems.
• Ability to use hand tools, power tools, and precision measurement instruments.
• Basic math skills including addition, subtraction, fractions, and measurement conversions.
• Strong attention to detail and commitment to producing defect-free work.
• Ability to follow verbal and written instructions accurately and consistently.
• Comfortable working in a standing position for extended periods and performing repetitive tasks.

Physical Requirements

• Ability to stand, walk, bend, and reach for up to 10 hours per shift.
• Ability to lift and carry up to 35 lbs. unassisted; team lift protocol for heavier items.
• Sufficient manual dexterity for precise assembly and tooling handling.
• Ability to work in varying environmental conditions including noise, heat, and light chemical exposure with appropriate PPE.

Working Conditions This position is performed entirely on the production floor in a manufacturing facility. The environment may include exposure to machinery noise, metal or plastic dust, coolants, oils, and other manufacturing-related substances. Appropriate personal protective equipment is provided and required. The operator may be assigned to rotating shifts or asked to work overtime to meet production demand.

Location Winston-Salem

Requirements Key Responsibilities Machine Operation

• Set up, operate, and tend manual assembly machines including presses, jigs, and fixtures according to work orders and production schedules.
• Operate and monitor automated assembly equipment such as programmable assembly systems, conveyor-fed lines, and turntable type machines to ensure efficient, high quality operation.
• Load and unload raw materials, components, and finished parts to and from machines.
• Perform changeovers between product runs, including tooling swaps, fixture adjustments, and program selection.

Quality & Inspection

• Inspect finished assemblies using calipers, gauges, go/no-go fixtures, and other measurement tools to verify dimensional and functional conformance and record the results per work instructions.
• Identify and segregate non-conforming parts; complete reject tags and notify supervisor of recurring defects.
• Perform first-article and in-process inspections per control plans and quality documentation.
• Maintain production records including part counts, scrap logs, and inspection results.

Maintenance & Housekeeping

• Perform routine operator-level preventive maintenance tasks: lubrication, cleaning, minor adjustments, and consumable replacement.
• Report equipment malfunctions, unusual noises, or performance degradation to maintenance personnel promptly.
• Keep work area, machines, and tooling clean and organized in accordance with 5S standards.
• Properly store fixtures, tooling, and materials at end of shift.

Safety & Compliance

• Follow all company safety policies, and OSHA regulations at all times.
• Wear required personal protective equipment (PPE) including safety glasses, hearing protection, and gloves as applicable.
• Immediately report unsafe conditions, near-misses, or injuries to the supervisor.
• Participate in safety training, toolbox talks, and continuous improvement initiatives.

Teamwork & Communication

• Communicate effectively with team leads, quality technicians, and maintenance staff regarding production status and issues.
• Support cross-training efforts by learning multiple machine types and assembly processes.
• Assist with new operator onboarding and informal knowledge transfer as requested.

Physical Requirements

• Ability to stand, walk, bend, and reach for up to 10 hours per shift.
• Ability to lift and carry up to 35 lbs. unassisted; team lift protocol for heavier items.
• Sufficient manual dexterity for precise assembly and tooling handling.
• Ability to work in varying environmental conditions including noise, heat, and light chemical exposure with appropriate PPE.

Working Conditions This position is performed entirely on the production floor in a manufacturing facility. The environment may include exposure to machinery noise, metal or plastic dust, coolants, oils, and other manufacturing-related substances. Appropriate personal protective equipment is provided and required. The operator may be assigned to rotating shifts or asked to work overtime to meet production demand.