Technician - Facility

Technician - Facility (Cogeneration Plant & Thermal Distribution)

Job Purpose

Operate, inspect, and maintain CoGeneration, Boiler, and Solar PV systems on a daily basis to support safe, compliant, and reliable energy supply for plant operations under senior supervision.

Responsibilities

1. Operate CoGeneration systems, including gas turbines or engines, alternators, and auxiliary equipment in accordance with approved operating procedures.

2. Monitor plant operating parameters such as fuel flow, temperature, vibration, efficiency, and load, reporting alarms or abnormal conditions.

3. Carry out start-up and shutdown activities, including synchronisation and load adjustments within safe operating limits.

4. Perform operational checks on hot water boiler systems, covering pressure, temperature, flue gas conditions, blowdown, and water treatment dosing.

5. Monitor Solar PV system performance through SCADA or monitoring platforms, tracking inverter output, grid export, and fault notifications.

6. Execute preventive and corrective maintenance tasks for CoGen, Boiler, and Solar systems, including cleaning, lubrication, and component replacement.

7. Participate in statutory inspections and servicing works, coordinating with contractors and preparing systems for audits and certifications.

8. Maintain housekeeping standards and proper tool condition in control rooms, turbine halls, boiler houses, and MCC rooms.

9. Comply with HSE procedures and statutory regulations, applying correct PPE usage and reporting unsafe conditions or incidents.

10. Record operational readings and maintenance activities accurately in logbooks, CMMS, or designated systems for supervisory review.

Qualification and Experience

1. Certificate in Mechanical, Electrical, or Power Plant Technology (MQA recognized) or any related field.

2. Sijil Kemahiran Malaysia (SKM) Level 3 in mechanical/electrical fields is acceptable.

3. Fresh graduates or minimum 1 year of relevant experience in Facilities, Utilities, or Power Plant operations.

4. Experience in turbine, boiler, or solar system operations is an advantage.

Technician - Facility (Building Maintenance)

Job Purpose

Carry out maintenance and operational tasks for hostel and building facilities by maintaining electrical, mechanical, plumbing, and civil systems to deliver safe, reliable, and conducive living and working environments in compliance with statutory requirements.

Responsibilities

1. Execute preventive and corrective maintenance for hostel and building systems including HVAC, electrical, plumbing, firefighting, lifts, and civil structures.

2. Conduct routine inspections of hostel rooms, offices, and common areas to identify defects, wear, or abnormal conditions.

3. Carry out maintenance and basic repair of lighting systems, switchboards, water pumps, alarm systems, and utility equipment.

4. Perform minor civil works such as patching, painting, tiling, carpentry, and welding to maintain building condition and functionality.

5. Carry out troubleshooting activities for mechanical, electrical, and plumbing faults under authorised supervision.

6. Comply with Electricity Regulations 1994, OSHA 1994, FMA, and company safety policies during all maintenance activities.

7. Apply correct PPE usage and safe work practices, reporting unsafe conditions, near misses, and equipment malfunctions promptly.

8. Coordinate maintenance requests, hostel upkeep activities, and contractor works under direction of the Supervisor.

9. Record maintenance activities, spare part usage, and inspection results accurately for audit and reference purposes.

10. Maintain cleanliness and orderliness of workshops, tools, and work areas while practising responsible energy and water usage.

Qualification and Experience

1. Certificate/Diploma in Mechanical, Electrical, Civil, or Building Services Engineering (recognized by MQA) or any related field.

2. Wireman PW2/PW4 or Chargeman AO certification is an added advantage.

3. Minimum 1 year of experience in building/hostel/facility maintenance.

4. Fresh graduates with technical skills may be considered.

5. Basic understanding of MEP (mechanical, electrical, plumbing) systems.

6. Familiar with building maintenance practices, tools, and equipment.

7. Knowledge of relevant laws (OSHA 1994, Electricity Regulations 1994, FMA, Uniform Building By-Laws) is an advantage.

8. Ability to read technical drawings and manuals.

Technician - Facility (Power Distribution)

Job Purpose

Carry out daily operation, monitoring, and routine maintenance of the facility’s electrical power distribution systems to maintain safe, reliable, and compliant electricity supply in accordance with ST regulations and company safety standards.

Responsibilities

1. Perform daily meter readings at 33 kV, 11 kV, and LV distribution points and monitor power factor, load balance, and voltage stability.

2. Inspect transformers, HT/LV panels, and capacitor banks for overheating, leakage, abnormal noise, or other irregular conditions.

3. Monitor TNB intake supply and facility demand to support effective load management activities.

4. Execute preventive maintenance tasks on transformers, switchgear, breakers, and capacitor banks in accordance with approved checklists.

5. Carry out isolation, repair, and system restoration activities during electrical breakdowns.

6. Coordinate with contractors during statutory and condition-based testing such as transformer oil sampling, Hi-Pot testing, and relay calibration.

7. Comply with Electricity Regulations 1994, OSHA 1994, and company HSE standards, including PTW and LOTO requirements.

8. Participate in toolbox talks, safety drills, and hazard identification activities, reporting unsafe acts or conditions.

9. Record operational readings, inspection findings, and equipment status accurately in logbooks and maintenance records.

10. Report equipment condition, abnormalities, and completed work activities to the Senior Technician or Supervisor on a daily basis.

Qualification and Experience

1. Certificate / Diploma in Electrical Engineering, Power Systems, or related technical field (MQA recognized).

2. Sijil Kemahiran Malaysia (SKM) Level 3 in electrical installation/maintenance is acceptable.

3. Fresh graduates or 1 year of relevant electrical maintenance experience.

4. Experience in HT/LV distribution systems is an advantage.

Technician - Facility (Raw Water Treatment Plant)

Job Purpose

Carry out mechanical, electrical, or laboratory duties at the Raw Water Treatment Plant to maintain equipment reliability, electrical safety, and water quality compliance through inspections, preventive maintenance, testing, and troubleshooting.

Responsibilities

1. Execute preventive, corrective, and predictive maintenance on Raw Water Treatment Plant equipment and facilities.

2. Diagnose equipment abnormalities, conduct troubleshooting, and carry out corrective actions.

3. Perform mechanical activities including dismantling, servicing, alignment, lubrication, welding, pipe fitting, and equipment installation.

4. Carry out electrical installation, wiring, troubleshooting, and MCC/panel maintenance in compliance with Electricity Regulations 1994.

5. Conduct water quality sampling and laboratory testing such as pH, turbidity, chlorine, and conductivity measurements.

6. Record maintenance activities, inspections, laboratory results, and calibration data in accordance with ISO and internal SOP requirements.

7. Apply safe work practices including LOTO, HSE compliance, 5S discipline, and correct tool handling.

8. Monitor equipment condition through vibration analysis, temperature measurement, insulation resistance testing, earth continuity checks, and visual inspections.

9. Operate and monitor chemical dosing systems, including chemical forecasting, stock tracking, and dosing verification.

10. Respond to plant breakdowns and standby/on-call duties, reporting equipment faults and unsafe conditions to the Supervisor.

Qualification and Experience

1. Diploma / Certificate in Mechanical, Electrical, Environmental Science, or any related discipline.

2. PW01-PW04 / A01-A04 electrical competency preferred (for Electrical role).

3. Minimum 2 years relevant experience in industrial utility, water plant

4. Minimum 1 year relevant experience in industrial utility, water plant, or lab work.

5. Fresh graduates with strong practical training may be considered.