Habib Bassaine

Senior Qualification Engineer in charge of the qualification of HVAC material (fire damper and smoke control damper) for Hinkley Point C EPR project: -Drafting of technical documents (HVAC technical specifications, qualification methodologies, qualification test specifications, qualification test reports, qualification summary reports, qualification files, ...) according to input data and applicable documents and standards as per project schedule. -Support the project engineer resolving technical issues and answer technical queries raised by the HVAC suppliers. -Attend technical meetings with suppliers, test laboratories and/or client and drafting of the minutes of meeting. -Follow up of all qualification testing in laboratories, answer technical questions raised during the testing from laboratories and/or client, drafting and managing of non-conformance reports up to the close out when required. -Knowledge of the regulatory requirements (e.g. EN 1366-2; EN 1366-10), international and European standards related to HVAC (e.g. EN 1751) and code (RCCE 2012).

Define principles management of "open points" Follow up of open points through monthly meetings organized by various departments / groups: -Electrical section -Layout / civil work / transverse studies section -HVAC and Fluid systems section -Piping and equipments section Ensure the correct resolution of open issues by engineering groups: -Presentation of “open points” procedure to new engineers working in HPC Project -Be proactive to support engineering groups to establish decoupling values Management of “Assessment Findings” (technical queries raised by Office for Nuclear Regulation (ONR) regarding EPR design): -Draw up and implementation of “Assessment Findings” procedure -Coordination and management of activities related to “Assessment Findings” -Implementation and follow up of action plans to close out “Assessment Findings” according to Project milestone -Implementation of “Assessment Findings” indicators (weekly and monthly) Management of technical interfaces: -Coordinate management issues through different services -Support the engineering groups to identify external representatives -Participate in coordination meetings organized by the project stakeholders -Participate in internal quality control: checking the consistency of engineering deliverables Participate in the management of feedback experience from previous projects. Participate in risk analysis activities Perform a weekly report to the coordination team leader

Material inspection before erection in connection with material manager and supervisors. Draw up of site quality plans and ensure the approval of site quality plans in connection with the customer including implementation and follow up of site quality plans by subcontractors. Support the quality manager to perform quality audit of subcontractors on site with follow up of corrective actions. Review of quality requirements as defined in the contract with the customer and subcontractors during quality kick off meetings. Participate to quality control inspection on site with the customer and ensure that inspections are done according to standards and specifications as described in the site quality plans. Work closely with site technical office and site scheduling office to ensure that erection activities are carried out according to quality requirements. Management of non conformities from the opening up to the closure including implementation and follow up of corrective actions. Management of Technical Queries (FOB) sent by the customer until the closure. Management of quality documents: inspection reports, calibration certificates, material certificates, NDT reports, welder qualification, etc… Collect and update of all quality documents which will constitute the final documentation to be handed over to the customer. Participate to quality weekly meetings with the customer and subcontractors. Draw up of weekly quality reports to the quality manager in headoffice.

Material inspection for the HRSG (Heat Recovery Steam Generator) before erection in connection with material manager and supervisors Review, approval and implementation of Inspection and Test Plan (ITPL) of the HRSG: -Inlet duct, casing and baffles -Internal piping and associated valves -Exhaust Stack -Anchor bolts -Steel structures -Auxiliary steel structures -Harps -HP drums -IP drums -LP drums -Safety valves and silencers -Blowdown tanks -Feedwater tanks -External piping and associated valves -Painting -Expansion joints and bellows Quality Control inspection with management of all quality issues on site with follow up of NCR until the closure with corrective actions on site (for HRSG and tanks) Quality Control inspection and supervision of all welding and NDT activities in accordance with ITPL and ASME codes (ASME I, ASME 31.1, ASME V, ASME VIII, ASME IX) Ensure that inspections and test during erection are carried out, approved and documented as defined in the ITPL Support the quality manager to organize and supervise acceptance test and their approval by the customer and third party Collect and keep updated quality documents which constitute the final documentation to be handed over to the customer: inspection reports, calibration certificates, material certificates, NDT reports, welder qualification, etc… Draw up of a quality weekly report to the quality manager in headoffice

Writing technical requirements, validate technical studies on international project, lean manufacturing Development of wax line application for new facilities (Russia, India and Morocco) Writing technical specifications for the design and the making of wax tools Follow up and validate technical studies for international projects (Russia, India and Morocco) Definition and setting up in factories resources necessary for wax application (tools, nozzles, etc…) Participation in the industrialization of new vehicles in the Process Piloting the implementation of FOP Process in the factories (lean manufacturing) Technical assistance and follow up technical problems