Pascal GUIHO

FIVES DMS - Rolling Mills and Continuous Galvanized Lines (CGL) Position : Commissioning Manager Mars 2021 - USA - Visit CGL line at SDI (Columbus - Mississippi) and US steel (Findlay - Ohio). April to December 2021 - CHINA - Commissioning 3 Sendzimir Mill at YongJin, Baoxin and Fuxin Since January 2022 - R & D on robot to change rolls on Sendzimir Mill.

Commissioning manager DUS project (Diesel Ultime Secour) post Fukushima 6,6 KV – 3,5 MW – Nuclear power plant PENLY and FLAMANVILLE (FRANCE) • Management of team up to 16 people. • Management of subcontractors up to 10 people. • Test mechanical, electrical, I&C. • Test fire detection and protection (SIEMENS/DEF). • Test HVAC (NOVI – AXIMA). • Test piping (LTM) • Test motor (Fairbank) • Test alternator (Leroy somer) • Test switch gear (6,6 KV AC, 380 V AC, 125 V DC, 24 V DC) and cubicles OKKEN and PIX (Schneider) • Test PLC M340 (Schneider)

I. November 2018 – Compressure station gas TANAP - Eskisehir (Turkey) - Site acceptance test • Setting and commissioning of 3 after coolers (air fans cooler system type induced). • Management of subcontractors up to 7 people. • Tests static and dynamic measurement with instruments (speed, vibration, tension, current, power). • Final customer TANAP (Turkey). II. May 2018 – July 2018 – Shell Refinery - Saint Fergus (Scotland) - Site acceptance test • Setting and commissioning of 2 after coolers (air fans cooler system type induced). • Management of subcontractors up to 7 people. • Tests static and dynamic measurement with instruments (speed, vibration, tension, current, power). • Final customer Shell (Scotland) – Engineering Doosan Babcock (UK). III. March 2018 – April 2018 – Run in test in Saint Nazaire (France) • Construction on ground of 26 heat exchangers (air fans cooler system type forced). • Management of subcontractors up to 10 people. • Tests static and dynamic measurement with instruments (speed, vibration, air flow, noise, tension, current, power). • Dismantling – packing and expedition to final destination. • Final customer Nipigaz (Russia) – Engineering Peton (Russia) – Linde (Germany). IV. December 2017 – February 2018 - Hyundai HHI – Ulsan (South Korea) – Gas Treatment Platform GTP • Supervision construction and installation of 9 heat exchangers (air fans cooler system type induced) on offshore platform oil and gas. • Management of subcontractors up to 7 people. • Final customer ADMA - Abu Dhabi (UAE).

Commissioning manager Electrical and automation. LGV line with french fast train (TGV) between Tanger and Kenitra (Morocco) • Setup and start up 2 substations HV/MV (Switch and circuit breaker 225 KV and 25 KV, Transformer 225KV/25KV, TT & CT 225KV and 25 KV) • Setup and start up safety relays (MICOM from Schneider, PGT and PDZI from ICE) • Setup and start up 11 parallel post on LGV line (Switch and breaker 25KV, Autotransformer 25 KV, TT &CT 25 KV) • Setup and start up 13 post on LGV line (Switch and breaker 25KV, TT & CT 25 KV) • Control command cubicle with Fournie Grospaud PLC, HNZ protocol, ISAGRAF Software, Fournie Grospaud softwares.

Electrical and automation trainer on software for development and diagnostic. • IBS Cmd G4 software (Phoenix Contact) for diagnostic on Interbus network. • Syntop software for parameter and diagnostic on Indramat drives (Bosch Rexroth). • Codesys Software for development on industrial computer. • Indralogic software for development on PPC (Bosch Rexroth).

Electrical and automation trainer on software for development and diagnostic. • IBS Cmd G4 software (Phoenix Contact) for diagnostic on Interbus network. • Syntop software for parameter and diagnostic on Indramat drives (Bosch Rexroth). • Codesys Software for development on industrial computer. • Indralogic software for development on PPC (Bosch Rexroth).

MEP supervisor, ventilation for a tunnel (underground) use for a high voltage cable (400KV), Dubaï (United Arab Emirates). • Coordination of subcontractors (Civil – Electrical - Mechanical) • Report and coordination of installations, meeting on site with the customer • Follow up of the progress and tasks for the different activities on site (cable tray/ladder, conduits, cable pulling, instruments/motors/lighting/cubicles & electrical cabinets, termination)

Construction manager department E&I (Electricity and Instrument) in charge of installing four Gas Treatment Center (GTC) for an aluminum production plant (aluminium smelter), site of Ras al Khair (SAUDI ARABIA). Customer: MA’ADEN – ALCOA – RIO – TINTO (consultant: BECHTEL) • Management of construction team (10 direct people including supervisor and engineering) and coordination of subcontractors (up to 250 indirect people) • Relation (Key link) between the studies office (E &I engineering in France) and the customers • Report and coordination of installation, participation to the meeting directly on site with the customer • Follow up of different jobs and tasks in the different area of the site (cable tray/cable ladder and conduit, cables, instruments/motors/lights/cubicles/cabinets, termination) • Participation to the daily HSE meeting and interface meeting between different subcontractors and the consultant • Participation to the weekly progress meeting with the consultant and project owner • Review and update the planning with Primavera • Coordination with the commissioning department in order to deliver the different area according to the priority • Coordination with the procurement department and the different local supplier for the consumable and others • Coordination with the QA/QC department in order to establish the report for the test and performance

Commissioning manager in charge of BOP (all the auxiliaries) Hydroelectric plant, MEROWE DAM project in Sudan (10 unit 140MW) • Report and coordination of installation, participation to the site meeting with the customer • Test reports and validation according to the internal specifications and contract with the customer • Relation (Key link) between the engineering department in France (mechanical and electrical) and the customers regarding issues or modifications on site • Management of the camp (80 people) with kitchen, drivers, cleaners ... • Follow up of different jobs and tasks assigned to the construction team (20 supervisors) with the different system to install • Participation to the progress meeting with the consultant and project owner • Management and coordination of subcontractors to install auxiliary equipment suppliers (mechanical or electrical) to the power plant. Setup and commissioning with test report.

GOSS (Manufacturer of press (rotative offset) for printing company newspaper) Field manager export from the initial phase to the customer services : • Participation to the development and design for new equipments at the studies office • Validation of new studies and modification on the press • Report and coordination of installation, to the customer all over the world • Management and coordination team on site within multi-disciplinary with different background (electrician – mechanical – printer – PLC developer – software developer) • Management and coordination of subcontractors and auxiliary equipments supplier of the press • Test and validation according to the internal specifications (procedure) and sale contract with the customer • Final commissioning of the press with the customers and the international test organism for the printing company (IFRA Test) • Training and production assistance for the customer’s staff to use the new press • Services and emergency assistance to the customers • Relation (Key link) between the studies office and the customers

Engineer in different industrial sector activities, from prospecting to services after warranty Customer : EADS ex AIRBUS AEROSPATIALE, Cargill, STX (ex Chantier de l'Atlantique ALSTOM), Eurial, Stradal, Compagnie des Eaux de Nantes, Schneider-Télémécanique … • Development in automation (PLC) and industrial software for industrial installation (process) • Test and final commissioning of industrial installation

Development on PLC automation (network), supervisions and software on different businesses within different industrial sector activities (Degrémont, Forclum, Alstom CGP, CETELEC, Schneider-Télémécanique …) • Development in automation (PLC) and industrial software for industrial installation (process) • Test and final commissioning of industrial installation

Development on PLC automation (network) and supervisions with Schneider-Télémécanique equipment Development business report software (C++ language)

Development on PLC automation (network) and supervisions with Schneider-Télémécanique

EAABC Saumur (Ecole d'Application de l'Arme Blindée Cavalerie) Military service : Research and development IT service, development war simulation software for officer instruction (C++ language)